Skip to main content
Version: v1.3.5

Profiles

Profiles define different monitor configurations for different setups. Each profile specifies which monitors it applies to and what configuration to use.

Profile Structure​

[profiles.PROFILE_NAME]
config_file = "path/to/config/file"
config_file_type = "static"  # or "template"

[profiles.PROFILE_NAME.conditions]
power_state = "AC"      # optional: "AC" or "BAT"
lid_state = "Opened"    # optional: "Opened" or "Closed" (requires --enable-lid-events)

[[profiles.PROFILE_NAME.conditions.required_monitors]]
name = "eDP-1"
monitor_tag = "laptop"  # optional

Configuration File Types​

Static Configuration​

Static configurations are plain Hyprland config files. The service creates a symlink to them.

[profiles.laptop_only]
config_file = "hyprconfigs/laptop.conf"
config_file_type = "static"

hyprconfigs/laptop.conf:

monitor=eDP-1,2880x1920@120,0x0,2.0,vrr,1

Template Configuration​

Templates use Go template syntax for dynamic configuration generation.

[profiles.dual_monitor]
config_file = "hyprconfigs/dual.go.tmpl"
config_file_type = "template"

[[profiles.dual_monitor.conditions.required_monitors]]
name = "eDP-1"
monitor_tag = "laptop"

[[profiles.dual_monitor.conditions.required_monitors]]
description = "LG.*ULTRAWIDE"
monitor_tag = "external"

hyprconfigs/dual.go.tmpl:

{{- $laptop := index .MonitorsByTag "laptop" -}}
{{- $external := index .MonitorsByTag "external" -}}
monitor={{$laptop.Name}},{{if isOnAC}}2880x1920@120{{else}}1920x1080@60{{end}},0x0,2.0
monitor={{$external.Name}},preferred,2880x0,1

See Templates for details on template syntax and variables.

Profile Conditions​

Required Monitors​

Each profile can require specific monitors to be connected. A profile matches when all its required monitors are present.

# Single monitor
[[profiles.laptop_only.conditions.required_monitors]]
name = "eDP-1"

# Multiple monitors
[[profiles.triple_4k.conditions.required_monitors]]
name = "eDP-1"

[[profiles.triple_4k.conditions.required_monitors]]
description = "Dell U2720Q"

[[profiles.triple_4k.conditions.required_monitors]]
description = "LG 27UK850"

Power State Conditions​

You can restrict a profile to only match on specific power states:

[profiles.performance_mode.conditions]
power_state = "AC"  # Only match when plugged into AC power

[[profiles.performance_mode.conditions.required_monitors]]
name = "eDP-1"

[profiles.battery_saver.conditions]
power_state = "BAT"  # Only match when on battery

[[profiles.battery_saver.conditions.required_monitors]]
name = "eDP-1"

Valid values:

  • "AC" - Only match when on AC power
  • "BAT" - Only match when on battery power
  • Omit power_state condition to match on any power state

See Power States Example for a complete configuration.

Lid State Conditions​

You can restrict a profile to only match on specific lid states (requires --enable-lid-events flag):

[profiles.lid_closed.conditions]
lid_state = "Closed"  # Only match when lid is closed

[[profiles.lid_closed.conditions.required_monitors]]
name = "eDP-1"

[profiles.lid_opened.conditions]
lid_state = "Opened"  # Only match when lid is open

[[profiles.lid_opened.conditions.required_monitors]]
name = "eDP-1"

Valid values:

  • "Closed" - Only match when lid is closed
  • "Opened" - Only match when lid is open
  • Omit lid_state condition to match on any lid state

See Lid States Example for a complete configuration.

Combining Conditions​

You can combine monitor, power state, and lid state conditions:

[profiles.docked_ac.conditions]
power_state = "AC"
lid_state = "Closed"

[[profiles.docked_ac.conditions.required_monitors]]
name = "eDP-1"

[[profiles.docked_ac.conditions.required_monitors]]
description = "External Monitor"

This profile only matches when:

  • On AC power AND
  • Lid is closed AND
  • Both eDP-1 and an external monitor are connected

Static Template Values​

You can define custom values that are available in templates. These can be defined globally or per-profile.

Global Static Values​

Available in all templates:

[static_template_values]
default_vrr = "1"
default_res = "2880x1920"
refresh_rate_high = "120.00000"
refresh_rate_low = "60.00000"

Per-Profile Static Values​

Override global values or add profile-specific values:

[profiles.laptop_only.static_template_values]
default_vrr = "0"        # Override global value
battery_scaling = "1.5"  # Profile-specific value

Using in Templates​

monitor=eDP-1,{{.default_res}}@{{if isOnAC}}{{.refresh_rate_high}}{{else}}{{.refresh_rate_low}}{{end}},0x0,1,vrr,{{.default_vrr}}

Fallback Profile​

When no regular profile matches, you can define a fallback profile:

[fallback_profile]
config_file = "hyprconfigs/fallback.conf"
config_file_type = "static"

The fallback profile:

  • Cannot define conditions (used when no conditions match)
  • Supports both static and template configuration types
  • Only used when no regular profile matches

Example fallback configuration:

# Generic fallback: configure all connected monitors with preferred settings
monitor=,preferred,auto,1

Profile Callbacks​

You can define commands to execute before and after profile application:

[general]
# Global exec commands - run for all profile changes
pre_apply_exec = "notify-send 'Switching profile...'"
post_apply_exec = "notify-send 'Profile applied'"

# Profile-specific commands override global settings
[profiles.gaming_setup]
config_file = "hyprconfigs/gaming.conf"
pre_apply_exec = "notify-send 'Gaming Mode' 'Activating...'"
post_apply_exec = "/usr/local/bin/gaming-mode-on.sh"

See Callbacks for details.

Examples​

For complete configuration examples, see: